The Kolibri KM-330XL PVC motorboat has a comfortable cockpit and a large carrying capacity dinghy – this inflatable boat is an excellent choice for family vacations and professional use. It is an upgraded Air-Deck boat.

KOLIBRI KM-330XL: the largest motorboat in this series, a 330 cm long rubber boat for four passengers. The 12 HP engine will take you to your destination as quickly as possible, and the shape of the boat with 44 cm diameter tubes ensures comfort and safety. This boat is perfect for a family vacation. The carrying capacity is impressive – 550 kg, although the PVC boat itself weighs less than 26 kg!

Type: Engine

Bottom type: flat

Weight: 43 kg

Length: 330 cm

Number of passengers: 4 people

Warranty: 3 years

Kolibri KM-330XL is included in the boat set

• A boat
• Oars
• Seat
• Air deck
• Pump
• Repair kit
• Manual
• Bag for the boat

Kolibri KM-330XL advantages

• smooth contours and better seaworthiness;
• extended cockpit;
• durable and cut-resistant five-layer PVC fabric with a density of 850 g/m2;
• air-deck floorboard – easy to assemble/disassemble;
• overpressure valves to relieve excessive pressure in pipes;
• sliding seats – install the seat in the most comfortable position for you;
• rowing equipment with improved hydrodynamic properties;
• monolithic transom mounts are much stronger than traditional mounts with PVC tapes.

“Explorer Light” (XL) serise – light boats for real adventures, from the mysterious quiet ponds with lilies to the breathtaking beauty of wide water areas, where the wind blows waves and you can barely see the opposite shore – now there is finally a unique opportunity to get everywhere in one boat. KOLIBRI’s light inflatable motorboats from the “Explorer Light” series give everyone the versatility for quiet rides in shallow water at the same time as the speed of a motorboat.

Advantages of “Explorer Light” series boats

1. Lightness and Portability: These boats are ideal for transportation. Thanks to their light weight and lack of a wedge, they are easy to attach to the roof frame of the car, allowing you to quickly set off on new water adventures. They also take up little space when stored in the cold season.
2. High Maneuverability: Since these flat-bottomed boats have no keel, it allows them to move easily on shallow, narrow sandbars in heavy water. It is ideal for fishing and exploring the flora and fauna of the river.
3. Fuel Savings: Thanks to their compact size, these boats use less fuel and carry more cargo, which saves you money
4. Ease of maintenance: KOLIBRI dinghies do not require complicated maintenance and repair, guaranteeing you reliability and ease of use.
5. Hull shape and seaworthiness: these boats impress with their smooth contours and high seaworthiness, ensuring comfort and safety even in waves.
6. Large Cockpit: The Explorer Light’s large cockpit comfortably accommodates 2-4 crew and cargo, making them ideal for family cruising.
7. Durable PVC fabric: The 850g/m2 density PVC fabric used ensures high strength and damage resistance, ensuring the boat’s longevity and added safety.
8. Air Deck Floorboard: This lightweight inflatable floorboard gives the boat extra buoyancy and can be a comfortable resting place when used separately from the boat.

Optionally, it is possible to order removable soft seats, a bag under the seat. Different types of awnings – removable canopy, protective shade, bimini top. KOLIBRI’s new development is a multipurpose awning. The echo sounder or spinners can be attached using the UKB on the inside of the inflatable tubes where it is convenient for you. You can always find a complete set of accessories and accessories on the KOLIBRI website in the corresponding section.

To make a purchase, select the following options:

The boat is available in three colors.

• Dark gray (black Air-Deck)
• Green (black Air-Deck)
• Light gray (light gray Air.Deck)

The post Kolibri KM-330XL appeared first on GST Marine.

This is Kolibri KM-300XL PVC dinghy boat with advanced design, enlarged cockpit, improved seaworthiness, stability and high load capacity flat-bottom motorboat. It is completed with air-deck floorboard.

KOLIBRI KM-300XL is a full-size motorboat with an advanced design and a large cockpit for greater comfort for a crew of three. The carrying capacity is impressive – 500 kg, although the PVC boat itself weighs 41 kg! The shape of this boat with 44 cm diameter tubes ensures comfort and safety.

Type: Engine

Bottom type: flat

Weight: 41 kg

Length: 300 cm

Number of passengers: 3 people

Warranty: 3 years

Kolibri KM-300XL is included in the boat set

• A boat
• Oars
• Seat
• Air deck
• Pump
• Repair kit
• Manual
• Bag for the boat

Kolibri KM-300XL advantages:

• smooth contours and better seaworthiness;
• extended cockpit;
• durable and cut-resistant five-layer PVC fabric with a density of 850 g/m2;
• air-deck floorboard – easy to assemble/disassemble;
• overpressure valves to relieve excessive pressure in tubes;
• sliding seats – install the seat in the most comfortable position for you;
• rowing equipment with improved hydrodynamic properties;
• monolithic transom mounts are much stronger than traditional mounts with PVC tapes.

Advantages of “Explorer Light” series boats

1. Lightness and Portability: These boats are ideal for transportation. Thanks to their light weight and lack of a wedge, they are easy to attach to the roof frame of the car, allowing you to quickly set off on new water adventures. They also take up little space when stored in the cold season.
2. High Maneuverability: Since these flat-bottomed boats have no keel, it allows them to move easily on shallow, narrow sandbars in heavy water. It is ideal for fishing and exploring the flora and fauna of the river.
3. Fuel Savings: Thanks to their compact size, these boats use less fuel and carry more cargo, which saves you money.
4. Ease of maintenance: KOLIBRI dinghies do not require complicated maintenance and repair, guaranteeing you reliability and ease of use.
5. Hull shape and seaworthiness: these boats impress with their smooth contours and high seaworthiness, ensuring comfort and safety even in waves.
6. Large Cockpit: The Explorer Light’s large cockpit comfortably accommodates 3 crew and cargo, making them ideal for family cruising.
7. Durable PVC fabric: The 850g/m2 density PVC fabric used ensures high strength and damage resistance, ensuring the boat’s longevity and added safety.
8. Air Deck Floorboard: This lightweight inflatable floorboard gives the boat extra buoyancy and can be a comfortable resting place when used separately from the boat.

Optionally, it is possible to order removable soft seats, a bag under the seat. Different types of awnings – removable canopy, protective shade, bimini top. KOLIBRI’s new development is a multipurpose awning. The echo sounder or spinners can be attached using the UKB on the inside of the inflatable tubes where it is convenient for you. You can always find a complete set of accessories and accessories on the KOLIBRI website in the corresponding section.

To make a purchase, select the following options:

The boat is available in three colors:

• dark grey (black Air-Deck)
• green (black Air-Deck)
• light gray (light gray Air-Deck)

The post Kolibri KM-300XL appeared first on GST Marine.

The Kolibri KM-270XL PVC motorboat is a dinghy boat with smooth contours, an enlarged cockpit and a large capacity. It is an upgraded Air-Deck dinghy.

The KOLIBRI KM-270XL motorboat is ideal for one or two people who fit comfortably in the comfortable cockpit. This PVC inflatable boat has a large load capacity of 450 kg and at the same time the PVC boat has a small weight 39 kg! The shape of this boat with 44 cm diameter tubes ensures comfort and safety.

Type: Engine

Bottom type: flat

Weight: 39 kg

Length: 270 cm

Number of passengers: 2 people

Warranty: 3 years

Kolibri KM-270XL is included in the boat set

• A boat
• Oars
• Seat
• Air deck
• Pump
• Repair kit
• Manual
• Bag for the boat

Kolibri KM-270XL advantages:

• smooth contours and better seaworthiness;
• extended cockpit;
• durable and cut-resistant five-layer PVC fabric with a density of 850 g/m2;
• air-deck floorboard – easy to assemble/disassemble;
• overpressure valves to relieve excessive pressure in tubes;
• sliding seats – install the seat in the most comfortable position for you;
• rowing equipment with improved hydrodynamic properties;
• monolithic transom mounts are much stronger than traditional mounts with PVC tapes.

Advantages of “Explorer Light” series boats

1. Lightness and Portability: These boats are ideal for transportation. Thanks to their light weight and lack of a keel, they are easy to attach to the roof frame of the car, allowing you to quickly set off on new water adventures. They also take up little space when stored in the cold season.
2. High Maneuverability: Since these flat-bottomed boats have no keel, it allows them to move easily on shallow, narrow sandbars in heavy water. It is ideal for fishing and exploring the flora and fauna of the river.
3. Fuel Savings: Thanks to their compact size, these boats use less fuel and carry more cargo, which saves you money.
4. Ease of maintenance: KOLIBRI dinghies do not require complicated maintenance and repair, guaranteeing you reliability and ease of use.
5. Hull shape and seaworthiness: these boats impress with their smooth contours and high seaworthiness, ensuring comfort and safety even in waves.
6. Large Cockpit: The Explorer Light’s large cockpit comfortably accommodates 2-4 crew and cargo, making them ideal for family cruising.
7. Durable PVC fabric: The 850g/m2 density PVC fabric used ensures high strength and damage resistance, ensuring the boat’s longevity and added safety.
8. Air Deck Floorboard: This lightweight inflatable floorboard gives the boat extra buoyancy and can be a comfortable resting place when used separately from the boat.

Optionally, it is possible to order removable soft seats, a bag under the seat. Different types of awnings – removable canopy, protective shade, bimini top. KOLIBRI’s new development is a multipurpose awning. The echo sounder or spinners can be attached using the UKB on the inside of the inflatable tubes where it is convenient for you. You can always find a complete set of accessories and accessories on the KOLIBRI website in the corresponding section.

To make a purchase, select the following options:

The boat is available in three colors:

• dark grey (black Air-Deck)
• green (black Air-Deck)
• light grey (light grey Air-Deck)

The post Kolibri KM-270XL appeared first on GST Marine.

• Type: Rowing boat
• Bottom Type: Flat
• Weight:12,5 kg
• Length: 220 cm
• Number of passengers: 1 people
• Warranty: 3 years

Advantages:

• The tubes are made of light five-layer PVC fabric with a density of 850 g/m2;
• The main assembly units are welded with HFW equipment;
• Light weight and small size when folded for transport;
• Quick assembly and disassembly of the boat;
• Light parts;
• Light oars;
• Sliding seat – stepless variable positioning along the boards of the boat allows you to install the seat in the most comfortable place for you;

Kolibri K-220T set includes:

• PVC boat – 1 pc
• Foot pump – 1 pc
• Oars – 2 pcs
• Bench (sea tile) – 2 pcs
• Boat carrying bag – 1 pc
• Repair kit (glue, PVC patches) – 1 pc
• Boat owner’s manual with warranty

This Kolibri K-220T PVC rowing boat has the same characteristics as any other PVC rowing boat or dinghy, which differs from other inflatable boats in its simple construction and is available in different lengths (up to 3 meters). These are the most popular boats, consisting of an O-shaped tube divided into 2 chambers. Rowing rubber boats are boats with a separate model range, distinguished by simple construction, up to 3 m long. These are the most popular boats, consisting of an O-shaped tube divided into 2 chambers.

As additional equipment:

• When ordering a boat with a mooring belt + 20 euros

To make a purchase, select the following options:

• Select the type of bottom you want
• Choose the desired color (the main colors are green, light gray, dark gray)

The post Kolibri K-220T appeared first on GST Marine.

A small draft with high buoyancy allows the Kolibri KM-420CM catamaran motorboat to move in the shallows, where the classic PVC e. a inflatable dinghy can’t do that.

Like other Kolibri PVC boats, this Kolibri catamaran motor boat is made of high-quality 5-layer PVC, with all seams welded by HFW equipment.

    Type: motor

    Bottom Type: flat

    Weight: 54 kg

    Length: 420 cm

    Number of passengers: 7 people

    Warranty: 3 years

Kolibri KM-420CM equipment includes:

• PVC boat – 1 pc
• foot pump – 1 pc
• oars – 2 pcs
• bench (sea tile) – 2 pcs
• boat carrying bag – 1 pc
• repair kit (glue, PVC patches) – 1 pc
• boat owner’s manual with warranty – 1 pc

Inflatable motor catamarans have always been recognized as extremely reliable boats for travel and recreation on the water. SC KOLIBRI BMC goes beyond the tradition of manufacturing inflatable boats and their motor catamarans of the Sea Cat series – thus moving to a new level of water activities.

Kolibri KM-420CM advantages:

• low mass of the set;
• quick installation and launching;
• strong and cut-resistant five-layer PVC fabric with a density of 1100 g/m²;
• welding of all nodes on Hot Air equipment;
• reinforcement of the tube lines with a protective strake 120 mm;
• improved floorboard air-deck;
• transom – made of high quality, moisture-resistant laminated plywood;
• overpressure valves – to release excess in tubes;
• sliding benches – stepless movement of benches along the side of the boat allows you to install the seat in the most convenient place for you;
• oar group with improved hydrodynamic characteristics;
• monolithic transom mounting supports are several times stronger and more reliable than traditional mounting using PVC tapes.

If speed and handling, performance and seaworthiness are important to you, as well as the possibility of installing a powerful engine and long trips, even in shallow water or in reeds – choose the Sea Cat series of inflatable catamaran-type motorboats! If you want a boat with a powerful engine and a large capacity and carrying capacity, you need the KOLIBRI inflatable motor boat,
This boat is for those who value reliability and durability, good seaworthiness, high load capacity.

The Kolibri KM-420CM boat is available in dark grey color and with Air-Deck.

The post Kolibri KM-420CM appeared first on GST Marine.

A small draft with high buoyancy allows the Kolibri KM-380CM catamaran motorboat to move in the shallows, where the classic PVC e. a inflatable dinghy can’t do that.

Like other Kolibri PVC boats, this Kolibri catamaran motor boat is made of high-quality 5-layer PVC, with all seams welded by HFW equipment.

    Type: motor

    Bottom Type: flat

    Weight: 51 kg

    Length: 380 cm

    Number of passengers: 6 people

    Warranty: 3 years

Kolibri KM-380CM equipment includes:

• PVC boat – 1 pc
• foot pump – 1 pc
• oars – 2 pcs
• bench (sea tile) – 2 pcs
• boat carrying bag – 1 pc
• repair kit (glue, PVC patches) – 1 pc
• boat owner’s manual with warranty – 1 pc

Inflatable motor catamarans have always been recognized as extremely reliable boats for travel and recreation on the water. SC KOLIBRI BMC goes beyond the tradition of manufacturing inflatable boats and their motor catamarans of the Sea Cat series – thus moving to a new level of water activities.

Kolibri KM-380CM advantages:

• low mass of the set;
• quick installation and launching;
• strong and cut-resistant five-layer PVC fabric with a density of 1100 g/m²;
• welding of all nodes on Hot Air equipment;
• reinforcement of the tube lines with a protective strake 120 mm;
• improved floorboard air-deck;
• transom – made of high quality, moisture-resistant laminated plywood;
• overpressure valves – to release excess in tubes;
• sliding benches – stepless movement of benches along the side of the boat allows you to install the seat in the most convenient place for you;
• oar group with improved hydrodynamic characteristics;
• monolithic transom mounting supports are several times stronger and more reliable than traditional mounting using PVC tapes.

If speed and handling, performance and seaworthiness are important to you, as well as the possibility of installing a powerful engine and long trips, even in shallow water or in reeds – choose the Sea Cat series of inflatable catamaran-type motorboats! If you want a boat with a powerful engine and a large capacity and carrying capacity, you need the KOLIBRI inflatable motor boat.
This boat is for those who value reliability and durability, good seaworthiness, high load capacity.

The Kolibri KM-380CM boat is available in dark gray color and with Air-Deck.

The post Kolibri KM-380CM appeared first on GST Marine.

A small draft with high buoyancy allows the Kolibri KM-340CM catamaran motorboat to move in the shallows, where the classic PVC e. a inflatable dinghy can’t do that.

Like other Kolibri PVC boats, this Kolibri catamaran motor boat is made of high-quality 5-layer PVC, with all seams welded by HFW equipment.

    Type: motor

    Bottom Type: flat

    Weight: 37 kg

    Length: 340 cm

    Number of passengers: 4 people

    Warranty: 3 years

Kolibri KM-340CM equipment includes:

• PVC boat – 1 pc
• foot pump – 1 pco
• oars – 2 pcs
• bench (sea tile) – 2 pcs
• boat carrying bag – 1 pc
• repair kit (glue, PVC patches) – 1 pc
• boat owner’s manual with warranty – 1 pc

Inflatable motor catamarans have always been recognized as extremely reliable boats for travel and recreation on the water. SC KOLIBRI BMC goes beyond the tradition of manufacturing inflatable boats and their motor catamarans of the Sea Cat series – thus moving to a new level of water activities.

Kolibri KM-340CM advantages:

• low mass of the set;
• quick installation and launching;
• strong and cut-resistant five-layer PVC fabric with a density of 1100 g/m²;
• welding of all nodes on Hot Air equipment;
• reinforcement of the tube lines with a protective strake 120 mm;
• improved floorboard air-deck;
• transom – made of high quality, moisture-resistant laminated plywood;
• overpressure valves – to release excess in tubes;
• sliding benches – stepless movement of benches along the side of the boat allows you to install the seat in the most convenient place for you;
• oar group with improved hydrodynamic characteristics;
• monolithic transom mounting supports are several times stronger and more reliable than traditional mounting using PVC tapes.

If speed and handling, performance and seaworthiness are important to you, as well as the possibility of installing a powerful engine and long trips, even in shallow water or in reeds – choose the Sea Cat series of inflatable catamaran-type motorboats! If you want a boat with a powerful engine and a large capacity and loading capacity, you need the KOLIBRI inflatable motor boat.
This boat is for those who value reliability and durability, good seaworthiness, high load capacity.

The Kolibri KM-340CM boat is available in dark gray color and with Air-Deck.

The post Kolibri KM-340CM appeared first on GST Marine.

A small draft with high buoyancy allows the Kolibri KM-300CM catamaran motorboat to move in the shallows, where the classic PVC e. a inflatable dinghy can’t do that.

Like other Kolibri PVC boats, this Kolibri catamaran motor boat is made of high-quality 5-layer PVC, with all seams welded by HFW equipment.

    Type: motor

    Bottom Type: flat

    Weight: 37 kg

    Length: 300 cm

    Number of passengers: 4 people

    Warranty: 3 years

Kolibri KM-300CM equipment includes:

• PVC boat – 1 pc
• foot pump – 1 pc
• oars – 2 pcs
• bench (sea tile) – 2 pcs
• boat carrying bag – 1 pc
• repair kit (glue, PVC patches) – 1 pc
• boat owner’s manual with warranty – 1 pc

Inflatable motor catamarans have always been recognized as extremely reliable boats for travel and recreation on the water. SC KOLIBRI BMC goes beyond the tradition of manufacturing inflatable boats and their motor catamarans of the Sea Cat series – thus moving to a new level of water activities.

Kolibri KM-300CM advantages:

• low mass of the set;
• quick installation and launching;
• strong and cut-resistant five-layer PVC fabric with a density of 1100 g/m²;
• welding of all nodes on Hot Air equipment;
• reinforcement of the tube lines with a protective strake 120 mm;
• improved floorboard air-deck;
• transom – made of high quality, moisture-resistant laminated plywood;
• overpressure valves – to release excess in tubes;
• sliding benches – stepless movement of benches along the side of the boat allows you to install the seat in the most convenient place for you;
• oar group with improved hydrodynamic characteristics;
• monolithic transom mounting supports are several times stronger and more reliable than traditional mounting using PVC tapes.

If speed and handling, performance and seaworthiness are important to you, as well as the possibility of installing a powerful engine and long trips, even in shallow water or in reeds – choose the Sea Cat series of inflatable catamaran-type motorboats! If you want a boat with a powerful engine and a large capacity and loading capacity, you need the KOLIBRI inflatable motor boat.
This boat is for those who value reliability and durability, good seaworthiness, high load capacity.

The Kolibri KM-300CM boat is available in dark gray color and with Air-Deck.

The post Kolibri KM-300CM appeared first on GST Marine.

This “KOLIBRI” KM-360D PVC keelboat – motorboat “ dinghy boat” is made of high quality 5-layer PVC with all seams welded by HFW equipment. This is a safe boat.

Type: Engine

Bottom type: inflatable wedge

Weight: 62,5 kg

Length: 360 cm

Number of passengers: 5 people

Warranty: 3 years

Kolibri KM-360D advantages:

• Durable and cut-resistant five-layer PVC fabric with a density of 1100 g/m2;
• Floor board (folding floors (foot book));
• Two versions of floorboards: aluminum or plywood;
• The entire width of the interface is reinforced with an aluminum profile;
• Additional strengthening of floorboards;
• The main assembly units are welded using HFC (HFW) equipment;
• Wedge lines reinforced with 6 cm protective strip;
• The transom is made of film-covered plywood;
• Overpressure valves to relieve excess pressure in pipes;
• Sliding seats – install it in the most comfortable position;
• Rowing equipment with improved hydrodynamic properties;
• Bow roll with anchor rope attachment;
• Monolithic transom mounts

Kolibri KM-360D includes:

• PVC boat – 1 pc
• Foot pump – 1 pc
• Oars – 2 pcs
• Bench (marine plywood) – 2 pcs
• Boat carrying bag – 1 pc
• Repair kit (glue, PVC patches) – 1 pc
• Boat owner’s manual with warranty

If speed and handling, performance and seaworthiness are important to you, as well as the possibility of installing a powerful engine and long trips – choose the Standard (D) – series inflatable keelboat, motor boat, PVC boat (rubber boat)! If you want a boat with a powerful engine and high capacity and carrying capacity, you need the Kolibri KM-360D Kolibri inflatable keel Profi series motorboat!

This boat is for those who value reliability and durability, good seaworthiness, high load capacity.

To make a purchase, select the following options:

• Choose the type of base you want (plywood or aluminum)
• Choose the desired color (the main colors are green, light gray and dark gray)

The post Kolibri KM-360D appeared first on GST Marine.

This “KOLIBRI” KM-330D PVC keelboat – motorboat “ dinghy boat” is made of high quality 5-layer PVC with all seams welded by HFW equipment. This is a safe boat.

Type: Engine

Bottom type: inflatable wedge

Weight: 58 kg

Length: 330 cm

Number of passengers: 4 people

Warranty: 3 years

Kolibri KM-330D advantages:

• Durable and cut-resistant five-layer PVC fabric with a density of 1100 g/m2;
• Floor board (folding floors (foot book));
• Two versions of floorboards: aluminum or plywood;
• The entire width of the interface is reinforced with an aluminum profile;
• Additional strengthening of floorboards;
• The main assembly units are welded using HFC (HFW) equipment;
• Wedge lines reinforced with 6 cm protective strip;
• The transom is made of film-covered plywood;
• Overpressure valves to relieve excess pressure in pipes;
• Sliding seats – install it in the most comfortable position;
• Rowing equipment with improved hydrodynamic properties;
• Bow roll with anchor rope attachment;
• Monolithic transom mounts

Kolibri KM-330D includes:

• PVC boat – 1 pc
• Foot pump – 1 pc
• Oars – 2 pcs
• Bench (marine plywood) – 2 pcs
• Boat carrying bag – 1 pc
• Repair kit (glue, PVC patches) – 1 pc
• Boat owner’s manual with warranty

If speed and handling, performance and seaworthiness are important to you, as well as the possibility of installing a powerful engine and long trips – choose the Standard (D) – series inflatable keelboat, motor boat, PVC boat (rubber boat)! If you want a boat with a powerful engine and high capacity and carrying capacity, you need the Kolibri KM-330D Kolibri inflatable keel Profi series motorboat!

This boat is for those who value reliability and durability, good seaworthiness, high load capacity.

To make a purchase, select the following options:

• Choose the type of base you want (plywood or aluminum)
• Choose the desired color (the main colors are green, light gray and dark gray)

The post Kolibri KM-330D appeared first on GST Marine.